Plumber in Greenland, NH

Greenland sits between Portsmouth and the Great Bay, and its homes mix newer subdivisions with older farmhouses and Cape-style houses. Many properties use private wells and septic systems, which changes how plumbing problems show up. A slow drain can point to a septic issue, and low pressure can come from a well pump or pressure tank rather than the pipes. We check the whole system before recommending a repair.

Low pressure, short cycling and well pumps

If your pressure drops, the pump clicks on and off every few seconds, or the water sputters, the cause is often a waterlogged pressure tank, a worn pressure switch or a failing check valve. We read the pressure at the tank and at the house first, so you know whether the fault is in the well equipment or in the pipes inside the home before any part is replaced.

Hard water, iron and stained fixtures

Many private wells in coastal New Hampshire carry hardness, iron or sediment. Orange or brown stains in sinks, scale on faucets and a water heater that wears out early are the usual signs. We recommend testing the water first, then sizing a softener or filter to the result instead of guessing at equipment.

Slow drains in septic-connected homes

When more than one drain slows down, or you hear gurgling, the problem is usually in the main line or the tank connection rather than a single fixture. Harsh chemical drain openers can harm a septic system, so we clear the line mechanically, inspect it, and tell you plainly if the tank needs a septic contractor.

Freeze, thaw and sump pump season

Garages, crawl spaces and outdoor faucets are the weak points each winter, and spring thaw can push groundwater toward basements near the bay. Know where your main shutoff and well tank valve are, and test the sump pump before the thaw rather than during it.

Before you call

• Note whether the problem affects one fixture or the whole house.
• Tell us if your water comes from a private well or town supply.
• Mention whether the home is on septic.
• Shut off the main valve if water is actively leaking.
• Have your street and a callback number ready.

Diagnosis before price

We find the cause first, then give a written estimate that lists the scope and the price before work begins. If we find something else while we are there, we tell you and let you decide.

Permits and code

Water heater replacements, new fixtures and some repairs may need a permit in New Hampshire. We tell you when one applies and what the inspection covers, so the work is done to code and documented.

Wells and septic: what we do and do not do

We service well pumps, tanks, switches and the plumbing inside the home. Tank pumping and septic design belong to septic contractors, and we will say so plainly rather than guess.

• Written estimate before work
• Plain-English explanation of the cause
• Photos or notes of what we found when useful
• Tested repair and cleanup before we leave
• Care tips for your well, septic and water heater

Should I call a plumber or a septic company for a slow drain?

Start with a plumber if only some fixtures are slow, because the cause is usually a clogged line. If every drain is slow and the yard is wet or smells, the tank may be full and a septic contractor is the right call.

Why does my well water pressure go up and down?

A waterlogged pressure tank or a worn pressure switch is the usual cause. A pressure reading at the tank tells us whether the fault is the pump equipment or the pipes inside the house.

1. Call and describe the problem.
2. We confirm the visit time.
3. We diagnose and give a written estimate.
4. The work is completed and tested.
5. We explain the repair and care tips.